Checking calibration for H-Clip in CV.

To check your machine calibration when using H-clips:

Cut several square test panels on your CNC. We suggest not cutting them on a table saw. Cut your test parts small enough to not waste material, but large enough to hold/feed the parts securely and safely in your boring/insertion machine.

Use the HClip Test.cvj to set up and machine your test parts. Your first attempt should show you define how much you need to adjust your HBore hole center until you get a flush edge with the two parts. Please refer to the files provided here.

Note: Please let us know if the HClip Test.cvj does not work in your version of CV.